Vcehome > VMware > VCAP-NV Design 2020 > 3V0-41.19 > 3V0-41.19 Online Practice Questions and Answers

3V0-41.19 Online Practice Questions and Answers

Questions 4

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:

1.

Maximum performance and availability is required between the physical and virtual network.

2.

Load Balancing service is required for back-end web servers.

3.

NAT is required.

Which should the architect include in their design?

A. Deploy a Tler-1 gateway and connect It to an Active/Active Tier-0 gateway with ECMP configured.

B. Deploy an Active/Active Tier-0 gateway and configure ECMP.

C. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.

D. Deploy an Active/Passive Tier-0 gateway and configure ECMP.

Browse 50 Q&As
Questions 5

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:

1.

Customer Is concerned with NSX Manager availability.

2.

3 cabinets/racks are available in the data center.

3.

No integration with 3rd party solution is required.

4.

There is no budget for physical equipment acquisition.

5.

The 3 cabinets/racks do not share the same L2 domain.

Which three should the architect include in their design to address the customer's concern with NSX Manager availability? (Choose three.)

A. Use another NSX Manger IP in case an appliance falls.

B. Deploy 2 cold standby NSX Manager appliances in rack 2/3.

C. Deploy an NSX Manager Appliance per rack and cluster them.

D. Use a physical/internal load-balancer with the cluster.

E. Use separate IP per NSX Manager appliance per rack.

F. Deploy a single active NSX Manager appliance in rack 1.

Browse 50 Q&As
Questions 6

A customer wants to place their NSX Managers in different subnets. Which would an architect recommend to support the request?

A. Use a cluster Virtual IP.

B. Use round-robin DNS.

C. Use a load balancer.

D. Use NAT.

Browse 50 Q&As
Questions 7

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:

1.

There Is a critical application used by the Finance Team.

2.

The critical application has an availability and recoverability SLA of 99.99%.

3.

The critical application Is sensitive to network changes.

Which two should an architect include in their design? (Choose two.)

A. Install and configure hosts with 100Gbps physical NICs.

B. Configure Tler-0 gateway for eBGP and ECMP.

C. Configure Tier-1 gateway for eBGP and ECMP.

D. Enable BFD on Tier-0 gateway.

E. Configure multiple static routes on Tier-1 gateway.

Browse 50 Q&As
Questions 8

Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)

A. IPv6 Distributed Firewall

B. IPv6 OSPF

C. IPv6 switch security

D. IPv6 static routing

E. IPv6 DNS

F. IPv6 VXLAN

Browse 50 Q&As
Questions 9

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:

1.

Customer currently has a single 10 host vSphere cluster.

2.

Customer wants to improve network security and automation.

3.

Current cluster utilization and business policies prevent changing the existing vSphere deployment.

4.

High-availability is important to the customer.

Which three should the architect include in their design? (Choose three.)

A. Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti-affinity rules to NSX Managers.

B. Deploy at least two large-size NSX-T Edge virtual machines in the vSphere cluster.

C. Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines of the NSX-T Edge cluster.

D. Remove 2 hosts from the cluster and create a new edge cluster.

E. Apply vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs.

F. Deploy the NSX Controllers in the management cluster.

Browse 50 Q&As
Questions 10

Which two resources can be used by an NSX architect during the Assessment Phase? (Choose two.)

A. vRealize Network Insight

B. VMware customer references

C. application licensing

D. VMware Validated Design

E. key stakeholder interviews

Browse 50 Q&As
Questions 11

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:

1.

There is a performance based SLA for East - West traffic.

2.

The business critical applications require prioritization of their traffic.

3.

One of the services is a file share and has a high demand for bandwidth.

Which two should the architect Include In their design? (Choose two.)

A. Monitor East-West traffic throughout normal business cycles.

B. Build a segment QoS profile and review the impact of utilizing this feature.

C. Review average North/South traffic from the core switches and firewall.

D. Install vRNI on the current infrastructure In Assessment Mode.

E. Meet with the organization's application team to get additional Information.

Browse 50 Q&As
Questions 12

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:

1.

There are applications which use IPv6 addressing.

2.

Network administrators are not familiar with NSX-T Data Center solutions.

3.

Hosts can only be configured with two physical NICs.

4.

There is an existing management cluster to deploy the NSX-T components.

5.

Dynamic routing should be configured between the physical and virtual network.

6.

There is a storage array available to deploy NSX-T components.

Which constraint was documented by the architect?

A. There are applications which use IPv6 addressing.

B. There are enough CPU and memory resources in the existing management cluster.

C. Dynamic routing should be configured between the physical and virtual network.

D. Hosts can only be configured with two physical NICs.

Browse 50 Q&As
Questions 13

What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing?

A. Deploy a standalone Edge as the L2 VPN client.

B. Deploy a standalone NSX Controller.

C. Deploy a standalone NSX Manager.

D. Deploy a standalone Edge as the IPSec VPN.

Browse 50 Q&As
Exam Code: 3V0-41.19
Exam Name: Advanced Design NSX-T Data Center 2.4
Last Update: May 10, 2024
Questions: 50 Q&As

PDF

$49.99

VCE

$59.99

PDF + VCE

$67.99