Which two statements about tenant bridge domain Layer 2 unknown unicast forwarding modes are true'? (Choose two.)
A. If forwarding mode is flood, unknown Layer 2 unicast is sent to all Layer 2 ports in the bridge domain.
B. If forwarding mode is proxy, unknown Layer 2 unicast packets are sent to border leaf proxy for forwarding.
C. By default, multicast traffic is always flooded within the bridge domain VLAN.
D. Layer 2 unknown unicast can be set to flood or proxy, the default is flood.
E. If border leaf proxy cannot resolve the destination, packet is flooded.
Which messaging protocol is used by the vPC peers to communicate with each other?
A. LLDP
B. CFS
C. ZMQ
D. VPCT
Which MO name represents a physical domain?
A. RtDomP
B. PhysDomP
C. physDomP
D. InfraRtDomP
A VMM endpoint off of a UCSB is unable to hit its anycast gateway, but the MAC address of the VM can be seen in one of the fabric interconnects Wh1Ch option is the cause of the issue?
A. The active NIC on the host has gone down and the host has not yet failed over.
B. There is no native VLAN configured within the data path of the Cisco UCS.
C. LLDP is not enabled in the vSwitch policies.
D. The VLAN tag is being changed at the vNIC or uplink port.
Which three statements about logical, resolved, and concrete model in Cisco ACI are true? (Choose three.)
A. Objects in the resolved model are read-only objects that are used to pass the configuration object from the Cisco APIC to the needed switches.
B. Objects in the concrete model are concrete real objects that are configured by a user.
C. Objects in the logical model are read/write objects that are configured by a user.
D. iNXOS consumes objects from the concrete model to program switch hardware with the needed networking construct, such as vlan or vrf.
E. iNXOS consumes objects from the resolved model to program switch hardware with the needed networking construct, such as vlan or vrf.
F. NXOS consumes objects from the logical model to program switch hardware with the needed networking construct, such as vlan or vrf.
Which option describes how to clear a fault from the Cisco ARC after it has been generated?
A. Faults are raised and cleared automatically by the system.
B. Faults can be "acknowledged" only after the fault is in the "soaking" state.
C. Faults can be "acknowledged," which means it is immediately cleared from the system.
D. Faults are cleared only after the log is full, so the oldest faults are deleted.
Which Cisco UCS policy is required for VM endpoints to be discovered by the Cisco ACI fabric?
A. LAN connectivity policy
B. network control policy
C. dynamic vNIC connection policy
D. LACP policy
Refer to the exhibit
shell:domains = domain / Role1 | Role2 | Role3 / Role4 | Role5 | Role6
In the Cisco AV Pair, which two options are correct? (Choose two.)
A. Role1 = Read
B. Role2 = Read
C. Role5 = Write
D. Role2 = Write
E. Role6 = Write
F. Role1 = Write
Refer to the exhibit Which two statements about this managed object are true? (Choose two)
A. This object is part of the concrete model.
B. There are endpoints with encapsulation vlan-2230 in the EPG name "web-server" on node 101.
C. This object is part of the resolved model.
D. This object is part of the logical model
E. This object represents an FPG named "web server" in tenant Prod.
What does the acronym OBFL stand for?
A. Onboard Failure Logging
B. Out of band Failure Logic
C. Onboard Forwarding Logic
D. Oversubscription Forwarding Level
