A customer wants to deploy an Avaya Server (CS) 1000 Rls. 7x system in Avaya Aura solution. They plan to have the system support 50,000 users.
Which system type will meet the customer's needs?
A. CS 1000E Co-Resident Call Server and Signaling Server
B. CS 1000E Standard Availability (SA)
C. CS 1000E High Availability (HA)
D. CS 1000E High Scalability (HS)
A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.
How many voice channels does this configuration provide?
A. 32
B. 64
C. 96
D. 128
A customer requires an upgrade from release Communication Server 1000E Rls. 7x. the current system has a release 5.0 CPPM Call Server and an ISP 1100 Signaling Server. They have 874 IP telephone users and 810 TDM telephone deployed.
Which upgrade will support the customer's current deployment scenario?
A. Replace the CPPM and ISP 1100 with a COTS 2 server deployed as a Co-Resident Call Server and Signaling Server.
B. Upgrading the CPPM Call Server software to release 7.0 and deploy it as a Co-resident Call Server and Signaling Server Decommission the ISP 1100 Signaling Server.
C. Replace the CPPM and ISP 1100 with a CPDC server deployed as a Co-Resident Call Server, Signaling Server.
D. Upgrade the bios and the call Server software. Replace the ISP 1100 with a CPDC server deployed as a Signaling Server.
A customer with a Communication Server (CS) Rls. 7x Co-resident system is experiencing an Element Manager issue where the page cannot be displayed to the users. The CPDC Co-Resident server has the following deployment applications:
Call Server
Signaling Server
Element Manager
Which course of action allows for the least service interruption when restarting the Element Manager Web interface?
A. Restart the Jboss application from the Linux Base Manager.
B. Restart the Signaling Server application by pressing the INI button on CPDC server.
C. Restart the Jboss application by pressing the RST button on the CPDC server.
D. Restart the Signaling Server application by logging into Linux CLI and issuing the command reboot
A customer is commissioning a Communication Server (CS) 1000E 7x system with package 403 (soft switch) and 402 (IPMG). The CPDC Call Server software has been installed successfully, and now the customer is provisioning the Media Gateway Tone and conference loops for the Media Gateway Controller.
Which switch overlay and prompt should the customer use to configure the Media gateway TDS loop?
A. LD 17, XCT
B. LD 17, VXCT
C. LD 17, SUPT
D. LD 17, MGTDS
A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system, and needs to access the Call Server Overlay Shell to use the Call Server Overlay commands.
Which two commands are used to access the Call Server Shell? (Choose two)
A. cspdt
B. cslogin
C. csaccess
D. csconsole
Click the Exhibit button.
A technician is performing an upgrade of existing Communication Server 1000E Rls. 6.0 servers from the Deployment Servers. The system is pre-configured and the status is un-deployed. The server has been selected, but the Deployment Actions pull-down list does not include the choice to deploy.
Which two corrective actions must be taken to continue with deployment? (Choose two)
A. Click the radio button associated with the server
B. Click the Disable NFS button
C. Click the Commit button
D. Click the add Linux Server button
A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0. They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co- Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.
Which action must be taken to consolidate the servers?
A. Re-configure the Call Server IP address field in each Media gateway Controller
B. Re-configure the Telephony Node Information to reflect the Call Server ELAN IP
C. Re-configure the DSP Daughterbaords to reflect Call Server ELAN IP.
D. Re-configure the network Routing Service to reflect the Call Server ELAN IP address.
A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain.
Which Overlay 117 commands used to add the element to the Security Domain?
A. JoinSecDomain
B. Join ucmSecurity element
C. Register ucmsecurity device
D. Register ucmSecurity system
A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.
What happens to the Terminal Number (TN) format during this upgrade?
A. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all assigned Terminal Numbers.
B. The TN format is automatically converted to the large system format of Card-Unit for all assigned Terminal Numbers
C. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all new programmed Terminal Numbers
D. The format is automatically converted to the large system format of Loop-Shelf-Card-Unit for IP phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.
