Which OpenManage component is the central repository for asset and inventory information?
A. Array Manager
B. Server Agent
C. DRAC II Web Console
D. IT Assistant
What are three ways you can flash the BIOS on a PowerEdge server? (Choose three.)
A. using OMSA
B. using Device Manager
C. using ITA
D. using DSA
E. using a floppy diskette
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
A. A green plus sign appears on the virtual disk.
B. A red dot with a minus sign appears on the virtual disk.
C. A blue plus sign appears on the virtual disk.
D. A yellow "bang" appears on the virtual disk.
You are setting up a RAID using Dell Array Manager. What effect does selecting Express Mode have?
A. It allows settings to be entered before array creation and then performs an unattended setup.
B. It automatically creates an array and installs the operating system with no user input.
C. It performs a quick format on all hard drives.
D. It allows Array Manager to automatically select the RAID level and array size.
You are configuring a new PowerEdge 2650 that is running Windows 2000 Server. The system will be in a rack without a keyboard or monitor connected, so you want to turn off keyboard error messages. What should you do?
A. select the Do Not Report option for the Report Keyboard Errors field in the System Setup Utility
B. disable the PS/2 port in Windows 2000 Device Manager and reboot
C. boot to the Utility P artition, e xecute nokb.com before rebooting
D. rack the system, as the system will autodetect rack use and disable keyboard error reporting
What type of security authentication scheme is used by OMSA under Windows 2000?
A. NTLM
B. SNMP
C. NDS
D. PAM
The system administrator notices the Dell badge on the front of the server is flashing orange on the PowerEdge 2650. What utility should the system administrator load to determine the cause of the flashing diagnostic indicator?
A. Dell Server Assistant
B. OpenManage Array Manager
C. Dell Client Configuration Utility
D. OpenManage Server Administrator
Which three statements are true about installing the Intel drivers and utilities that allow teaming in Windows 2000? (Choose three .)
A. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel ProSet Utility CD.
B. You must install the ProSet Utility.
C. You must install the Intel driver using floppy diskettes.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel Network Drivers CD.
E. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
A. create a team and assign it a name
B. configure the IP address and subnet mask for the team
C. select the adapters from the list to add to the team
D. set the media type for the adapters
E. select the Broadcom Advanced Server Program Driver
F. enter the path and filename of the configuration to be saved
Which action would you take to convert a 1x6 backplane to a 2x3?
A. add a second SCSI controller card
B. install a power distribution board
C. install an interposer board
D. attach a daughter card
