When configuring a wireless mesh, an AP is assigned one of three roles. Match the description to each role.
Hot Area:
How do HP MSM products, which support the optimized WLAN architecture, forward client traffic onto the wired network?
A. The APs always forward traffic directly onto the wired network, thereby optimizing the traffic flow.
B. The controller always forwards traffic onto the wired network, thereby simplifying management and improving security.
C. While an individual AP must either forward all traffic locally or forward all traffic to the controller, different APs can exhibit different behaviors based on the needs of the company.
D. The APs can forward traffic for some VSCs directly onto the wired network and forward traffic for tunneled or access-controlled VSCs to the controller.
A network administrator wants to use a dedicated link for teaming communications between two HP MSM720 Controllers. In each MSM720's teaming settings, the administrator selects port 4 and sets the VLAN ID to 101. What is the correct setting for the port 4 network profile?
A. A network profile without a VLAN ID
B. A network profile with a VLAN ID that is not used in any another profile
C. A network profile with VLAN ID 101
D. The default network profile (Access network)
The HP MSM Controller features a free access option.
When a user clicks the Free Access button, the controller creates a user account for the guest. What is one feature of that account?
A. The account is copied to Guest Management Software (GMS) if the MSM Controller is synchronized with that application.
B. The username and password are derived from entries that the user types into the login page.
C. The account has an expiry time that is derived from the session timeout value in the default AC profile.
D. The account has an expiry time that is derived from the free access validity duration.
When is AP Provisioning required before deploying controlled APs in a simple network topology?
A. When using a Local Mesh to connect to the network
B. When an AP needs to be deployed with dynamic IP addressing
C. When the access point is using a Group other than the Default Group
D. Discovery of third-party access points
E. When you have Layer 2 connectivity to a controller
A company wants to increase its security by adding its security by adding a wireless intrusion detection system/intrusion prevention system (IDS/IPS), which could detect rogue APs and Wi- Fi Protected Access (WPA) attacks.
Which product would provide this extra layer of security?
A. HP Threat management Services z1 Module
B. HP RF Manager
C. HP TippingPoint IPS Platform
D. HP Intelligent management Center (IMC) with Endpoint Admission Defense (EAD)
What is one factor that a wireless network designer must consider when estimating path loss between an AP and a client?
A. The antenna gain
B. The transmit power of the AP
C. The client receiver sensitivity
D. The type of environmental obstruction
Refer to the exhibit.
A hospital has an HP MSM solution that provides guest access, including Web-Auth to the local login pages of the controller. The exhibit shows the Hospital VSC used by guests. The network administrators have created an isolated guest VLAN, VLAN 100. The HP MSM Controller should provide the same guest services to wired clients connected to this VLAN. The network administrator has configured a network profile and the required settings. How should the controller apply the profile in the VSC?
A. As the egress VLAN for unauthenticated users
B. As the egress VLAN for authenticated users
C. As the ingress VLAN
D. As the egress VLAN for intercepted users
Refer to the exhibit.
The exhibit shows a VSC setting that is disabled. A network administrator is creating an access- controlled VSC for guest access. Which use case does disabling this setting impact?
A. The company has central RADIUS servers and web servers, which it wants to use to authenticate guests.
B. The controller is part of a teaming solution.
C. Guests need to log into the controller's local pages to receive access to any resources.
D. Guests need to receive access to resources on their local subnet before authenticating.
