Which side of the OSPF router initiates the database description exchange?
A. the side with the higher IP address
B. the side with the higher router ID
C. the side with the higher priority
D. the side with the higher uptime
Which feature is used to route traffic to a specified ISP based on the source address?
A. filter-based forwarding
B. BGP outbound policy
C. local preference
D. IP source routing
By default, which VLAN ID value is associated with the default VLAN on EX Series switches?
A. 0
B. 1
C. 32
D. 255
Which Junos OS operational mode command provides a high-level view of all configured BGP peers?
A. show bgp group
B. show bgp neighbor
C. show bgp summary
D. show bgp adjacency
An OSPF broadcast segment has four OSPF-speaking routers. One router is in the DR state, one is in the BDR state, and two are in DR other states. How many 2Way OSPF sessions does a router in the DR other state have?
A. 1 session
B. 2 sessions
C. 3 sessions
D. 4 sessions
In the exhibit, the route 66.129.237.5 belongs to a Web server within AS 344.
If you view the AS-path attribute of this route on a router in AS 9021, what will it be?
A. 344 11 221 6044
B. 221 6044 11 344
C. 9021 221 6044 11 344
D. 221 6044 11 344 9021
Referring to the exhibit, what does the asterisk (*) indicate?
A. This entry is new
B. This entry is stale
C. The router received this entry
D. The router originated this entry
Which three statements are true when determining the master VRRP router? (Choose three.)
A. The lower priority is preferred.
B. The highest primary address is preferred if the priority is the same.
C. The router with preempt configured is the master.
D. The higher priority is preferred.
E. The router with the same primary and virtual address is the master.
What is the correct sequence of the BGP route selection process?
A. local preference, AS path, origin, MED, EBGP over IBGP, IGP metric cost, peer ID
B. local preference, AS path, MED, origin, EBGP over IBGP, IGP metric cost, peer ID
C. local preference, AS path, origin, MED, IGP metric cost, EBGP over IBGP, peer ID
D. local preference, origin, AS path, MED, EBGP over IBGP, IGP metric cost, peer ID
Referring to exhibit, which configuration change is need for an IS-IS Level 1 adjacency between
R1 and R2?
user@R1# show interfaces lo0
unit 0 {
family inet {
address 10.42.0.1/32;
}
family iso {
address 49.0002.0010.0042.0001.00;
}
}
user@R1# show protocols isis
interface ge-0/0/1.0 {
level 2 disable;
}
interface 1o0.0;
user@R2# show interfaces lo0
unit 0 {
family inet {
address 10.42.0.2/32;
}
family iso {
address 49.0001.0010.0042.0002.00;
}
}
user@R2# top shows protocols isis
interface ge-0/0/1.0;
interface lo0;
A. Enable Level 2 on R1's ge-0/0/1 interface.
B. Disable Level 2 on R2's ge-0/0/1 interface.
C. Configure the lo0 family ISO address 49.0002.0010.0042.0002.00 on R2.
D. Configure the lo0 family ISO address 49.0002.0010.0042.0002.00 on R1.
