A planned VxRail deployment will use an External vCenter Server and syslog server. Which ping connectivity tests should succeed and which should fail before the deployment?
A. Succeed: ESXi hosts and syslogFail: VxRail Manager and vCenter
B. Succeed: VxRail Manager and ESXi hostsFail: vCenter and syslog server
C. Succeed: vCenter and syslog serverFail: VxRail Manager and ESXi hosts
D. Succeed: VxRail Manager and syslogFail: vCenter and ESXi hosts
The Market Place on a VxRail Manager is empty on a newly deployed system. Testing shows that the Internet is reachable through proxy in the management network. Which action should be taken to correct this situation?
A. VxRail Manager has no proxy support.
B. Upgrade tolatest version and add proxy configuration manually.
C. Manually add the proxy information in the VxRail Manager configuration
D. Reset the appliance and redeploy with proxy information filled in the deployment process.
A company has a two chassis G Series cluster and wants to change the setup. This will require a reset of
the chassis.
What is the correct procedure?
A. Reset both chassis simultaneously through the reset script
B. Reset the primary chassis first, followed by the secondary chassis, through the reset script.
C. Reset both chassis simultaneously with the mobile build server
D. Reset the secondary chassis first, followed by the primary chassis, through the reset script.
What is a Dell EMC converged platform product?
A. VxRack
B. VxRail
C. Vscale Architecture
D. Vblock/VxBlock
A company has indicated that they do not want to change the native VLAN for their entire switch. Based on best practice, how should the Top of Rack (ToR) switch be configured?
A. Set the native VLAN on the switch ISL ports
B. The native VLAN for the switch must be set
C. Set the native VLAN only at the VxRail trunk ports
D. Do not configure ToR switch native VLAN and instead tag the VLAN on VxRail
When preparing for a VxRail deployment, which components require forward and reserve DNS records?
A. ESXi hosts, vRealize Log Insight, and Platform Services Controller
B. Platform Services Controller. vCenter, and ESRS/VE
C. ESXi hosts, vCenter, and vRealize Operations
D. ESXi Hosts, vCenter, and ESRS/VE
A workstation is being configured on the management VLAN (10.150.140.0/24) to connect to VxRail Manager for first time deployment. Configuring which IP addresses on the workstation will result in a successful deployment without having to change them during initialization?
A. 192.168.1.199 and 10.150.140.100
B. 192.168.1.250 and 10.150.140.255
C. 192.168.10.199 and 10.150.140.255
D. 192.168.10.250 and 10.150.140.250
When using vSphere Web Client, what is the source of information that can help validate good VxRail system post-deployment status?
A. MARVIN-Virtual-SAN-Cluster > Monitor > Health Logical View
B. MARVIN-Virtual-SAN-Cluster > Monitor > Virtual SAN > Health
C. Last Heartbeat, Last Configuration Sent, Network Environment Settings, Cluster Monitor
D. System Diagnostic, Events, Health Logical View, Health Physical View, Log Bundle
You have been asked to deploy a single, 4 node VxRail cluster for company. They would like to perform an online migration from their existing vSphere 6.0u2 environment. They have also asked that vCenter Enhanced linked-mode be supported. Based on best practice, what is the recommended deployment model?
A. Use existing vCenter with External PSC
B. Deploy Internal vCenter with External PSC
C. Use existing vCenter with Embedded PSC
D. Deploy Internal vCenter with Embedded PSC
During a VxRail deployment validation check it is discovered that the Top of Rack (ToR) switches have Spanning Tree Protocol enabled. What should be done before the implementation can proceed?
A. Confirm that ToR switchports connected to VxRail nodes are configured to get into "forwarding" mode quickly.
B. Confirm that ToR switch ports connected to VxRail nodes have fabric-trunk enabled.
C. Disable STP on the ToR switches
D. Confirm that isolated VLANs exist on the ToRswitches for each of the VxRail networks.
