A network administrator configures LLDP-MAD on an Aruba Virtual Switching Framework(VSF) fabric. The
administrator needs to enter an SNMP community string after v2c in this command:
Switch:(config) # vat lldp-rnad ipv4 10.1.0.2 v2c ---------------Which SNMP community string should the administrator enter?
A. one configured on the device at 10.1.0.2
B. one configured for the VSF fabric on AirWave
C. one configured on the VSF fabric as a whole
D. one configured on the standby member in the fabric
An Aruba Instant cluster is added in Aruba AirWave. A network administrator needs to change the cluster management level to Manage Read "Write. The exhibit shows the current status for the cluster.
What should the administrator do before changing the management level?
A. Check the cluster SNMP credentials and resolve the mismatch between the cluster credentials and AirWave credentials.
B. Verify that the cluster is configured with the same shared key that is configured in the global AirWave settings.
C. Investigate why the cluster configuration does not match the group configuration template and resolve any issues.
D. Determine why AirWave cannot contact the cluster and resolve any connectivity issues in the network.
An ArubaOS switch has the routing table shown in the exhibit. A network administrator then enters this
command: Switch (config) # ip routs 10.0.0.0/8 10.1.104.2
After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8.13.
What does the switch do with this traffic?
A. It load balances some of the traffic to 10.1.101.1 and some to 10.1.104.2.
B. It forwards at of the traffic to 10.1.104.2.
C. It drops the traffic.
D. It forwards all of the traffic to 10.1.101.1.
A network administrator manages an ArubaOS switch through the CLI The administrator needs to configure an untagged VLAN assignment on a range of interfaces. How should the administrator enter the untagged command to complete this configuration?
A. Create a manual, named interface range Then access the context for the range and specify the VLAN ID with the untagged command.
B. Access the context for a range of interfaces and specify the VLAN ID with the untagged command
C. Access the individual context for each of the interfaces and specify the VLAN ID with the untagged command
D. Access the VLAN context and specify a range of interfaces with the untagged command.
A port on an ArubaOS switch currently has its default VLAN assignment. The network administrator wants the port to continue to be part of the default VLAN. The administrator also wants the port to support VLANs 2 and 3.
What should the administrator do to accomplish this?
A. Add VLAN 2 to the port as an untagged VLAN assignment and VLAN 3 as a tagged assignment.
B. Add VLANs 2 and 3 to the VLAN permit list for the port.
C. Add VLANs 2 and 3 to the port as tagged VLAN assignments.
D. Add the port to hybrid VLAN 2 and 3.
Network administrators need to access an ArubaOS switch CLI remotely. How can the administrator ensure that all data passed between management stations and the switch is encrypted?
A. Create local user accounts and enable command authorization.
B. Configure operator and manager passwords for Telnet access.
C. Create an SSH key. enable SSH. and disable Telnet.
D. Enable HTTPS access.
Currently the routing switches shown in the exhibit have only connected IP routes. The network administrator needs to add static routes to support communications between subnet 10.1.4.0/24 and subnet 10.1.8.0/24. Which switch or switches require a static route to 10.1.8.0/24?
A. Switch-3 only
B. Switch-1 and Switch-3
C. Switch-1 only
D. Switch-1 and Switch-2
An ArubaOS switch has an LACP link aggregation with two links. How does the switch balance traffic over the links?
A. It assigns the first conversation (as defined by the load-balancing algorithm) to the first link, the second conversation to the second link, and so on, in a round-robin fashion.
B. It assigns the first packet to the first link, the second packet to the second link, and so on, in a round-robin fashion.
C. It assigns all traffic to the first link until the link reaches a bandwidth threshold; it then assigns traffic to the second link.
D. It assigns each conversation (as defined by the load-balancing algorithm) to a consistent link, based on a hash.
This exhibit shows the topology for a company campus LAN. Each access layer switch will be the default router for the devices connected to it. The company needs to permit the following:
1.
Communications between devices in an subnets
2.
Support for efficient traffic paths during normal operation and in situations in which a link fails
3.
Fast failover if a link fails
Which feature should the network administrator configure on the ArubaOS switches to support these requirements?
A. MSTP
B. RIP
C. Static Routes
D. OSPF
A network administrator enters this command on an ArubaOS switch:
Switch(config) # trunk 1,2 trk1
What is required for the switch to combine both interfaces in a link aggregation?
A. that the interfaces are up
B. that the interfaces are aggregated while in a shutdown state
C. that the interfaces are up and connect to interfaces that support active mode LACP
D. that the interfaces are up and have LACP enabled on them
