A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm).
How many rack units should a customer plan for this switch?
A. 5
B. 4
C. 6
D. 3
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a dro This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
A. 55.750 square feet {5,175 square meters)
B. 56.350 square feet {5,235 square meters)
C. 47.000 square feet {4,365 square meters)
D. 338,100 feet {31,410 square meters)
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
A. A + C
B. A + B
C. A + B + C + D
D. A + B + C
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
A. 802.11r
B. 802.11 ax
C. S02.11V
D. S02.11h
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be
necessary.
Which console connection cable should the customer purchase for the 555 APs?
A. RJ-45
B. RS-232
C. USB-A
D. Micro-B USB
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics: 2 or more spatial streams
802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches.
Which would be the most cost- effective solution that would meet the company's requirements?
A. AP 375 with external omnidirectional antennas
B. AP 365 with integrated omnidirectional antennas
C. AP 318 with external omnidirectional antennas
D. AP 510 with external omnidirectional antennas and plastic AP cover
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power
Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw
power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
A. One 3810M 40G 8 HPE Smart Rate switch
B. Two 2930F 24-port POE+ switches
C. Two 2930M 24-port POE+ switches
D. One 2930M 48-port POE+ switch
Which IRIS option will automatically create a project with a blank preconfigured Site-1?
A. New Campus
B. New Express Mode
C. New Project
D. New Site
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core. Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
A. three-tier and 10 Gbps
B. three-tier and 40 Gbps
C. two-tier and 10 Gbps
D. two-tier and 40 Gbps
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
A. Import the longitude and latitude information from any web-based map site
B. Import the longitude and latitude information from Google Maps
C. Create a screen capture from any web-based map site and import the picture file
D. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
