Vcehome > HP > Aruba Certified Design Expert (ACDX) > HPE6-A80 > HPE6-A80 Online Practice Questions and Answers

HPE6-A80 Online Practice Questions and Answers

Questions 4

Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the

celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.

The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that

employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.

The architect has selected AP-515S. About how many APs should the architect propose?

A. about 13-16

B. about 23-32

C. about 6-8

D. about 6-4

Browse 60 Q&As
Questions 5

For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

A. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

B. The customer wants to utilize LACP on AP515 in VSF switch configuration.

C. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.

D. The Aruba CX 630DM support up to 75W PoE+ per port

Browse 60 Q&As
Questions 6

Refer to the exhibit.

A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.

The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)

A. Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.

B. Connect the switch stack on each floor directly to the network cone on two "fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter- building fiber.

C. Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.

D. Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology. Connect two Floor f members to the network core with one fiber connection each

E. Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.

Browse 60 Q&As
Questions 7

A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution.

The solution will support up to 4.800

wireless client devices and include:

*

two Virtual Mobility controllers (VMCs) in a cluster

*

180 APs

Which licenses should the architect propose?

A.

1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses

B.

1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license

C.

1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses

D.

1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses

Browse 60 Q&As
Questions 8

In which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

A. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.

B. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails

C. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.

D. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.

Browse 60 Q&As
Questions 9

A customer has an Aruba solution with APs, MCs, and an MM The customer also uses AirWave and ClearPass. The customer wants to add Aruba CX Switches, which use per- user tunneled node, to the solution. How should the Aruba CX Switches integrate with the existing solution in order to determine when to tunnel device traffic to MCs?

A. They should be managed by AirWave with SNMPv3.

B. They should implement authentication to ClearPass.

C. They should be directed to MCs by a DHCP or DNS server.

D. They should be manually added as MDs in MM.

Browse 60 Q&As
Questions 10

Refer to exhibit.

A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.

Which correction must the architect make to the proposal to meet the customer requirements?

A. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.

B. Add a mode conditioning cable for each link between the wiring closet switches and the network core.

C. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers

D. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers

Browse 60 Q&As
Questions 11

What is one benefit that Airwave provides to customers in the 8.x OS network?

A. profiling of wired and wireless client behavior and detection when the behavior varies from the baseline

B. in-depth analytics oT mobile device presence and APIs to make this data available to other applications

C. a central UI from which to manage all of the Mobility Controllers (MCs)

D. ability to monitor the status and operation of the complete network over time

Browse 60 Q&As
Questions 12

A hospital wireless network must support many different types of users and devices, including: Visitors who access the Internet Admin staff, who run applications such as scheduling Medical staff, who look up patient info on their tablets Patient monitoring devices, which must not lose any traffic Communicator badges, which support real-time voice to allow nurses and doctors to communicate

The hospital needs to ensure that the most vital and time-sensitive traffic is prioritized and that visitors do not interfere with hospital applications. The MC should mark traffic that passes through it for an appropriate priority.

Which plan meets the needs? (The plans describe firewall roles and rules but do not need to use correct syntax. Note that

security roles are also not included.)

A. Medical staff = Highest. Patient monitoring = Highest. Admin staff - High. Communicator = Normal. Visitors = Low.

B. Communicator = Highest. Patient monitoring = Highest. Medical staff = High. Admin staff = Normal: Visitors = Low.

C. Patient monitoring = Highest. Medical staff = Highest. communicators = High. Admin staff = High. Visitors = Normal.

D. Medical staff = Highest. Communicator = High. Patient monitoring = High. Admin = High. Visitors = Normal

Browse 60 Q&As
Questions 13

An indoor sports stadium has 5.000 seats in two rings:

The stadium has a ceiling height of 72 feet (22 m).

There is a catwalk around the perimeter of me stadium that is 54 feet (13 m) from me floor.

There are two scoreboards at either end of the stadium

The construction of the stadium is concrete and steel.

The customer has indicated a preference for overhead coverage, and the wireless network should support 3500 concurrent clients. The architect plans to install the APs on the catwalk to service sections of the floor below

Which type or antennas are recommended for the APS that provide the overhead coverage?

A. downtilt

B. high gain directional

C. high gain omnidirectional

D. vagi

Browse 60 Q&As
Exam Code: HPE6-A80
Exam Name: Aruba Certified Design Expert Written
Last Update: May 13, 2024
Questions: 60 Q&As

PDF

$49.99

VCE

$59.99

PDF + VCE

$67.99