You need to attach a storage array as external storage on a VSP G600. What are two requirements? (Choose two.) Choose 2 answers
A. port security enabled
B. UVM license enabled
C. Host Group mode set
D. External storage
A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP
G600 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?
A. Parity groups must be deleted.
B. The RAID level must be changed in Storage Navigator.
C. The RAID level in the SVP Maintenance window must be changed.
D. The RAID 5 group must be put into DRU mode in Storage Navigator.
Which two actions can be performed with the Block Element Manager (BEM) on the VSP Gx00 series? (Choose two.)
A. Generate a configuration report.
B. Configure the SVP.
C. Generate license keys.
D. Set front-end port parameters.
You need to replace a part in a VSP G800.
What are three ways for you to invoke the Maintenance Utility? (Choose three.)
A. using the GUM
B. using the HM800 SRT tool
C. from Hitachi Command Suite
D. in the HM800 maintenance wizard
E. from the MPC connected to the Maintenance LAN port on the array
What would be the recommended RAID level to be used to create an HDP pool?
A. RAID 1
B. RAID 1+0
C. RAID 5
D. RAID 6
Which component in the VSP Gx00 series provides the CFM and the cache with power In case of power outage?
A. Backup Module
B. Battery Module
C. Cache Module
D. Power Module
What does Universal Volume Manager (UVM) allow on the VSP Gx00 systems?
A. to create virtual servers
B. to use MPs on the attached disk storage
C. to create LUNs on the attached disk storage
D. to map disk space from the attached disk storage
You are installing six VSP Gx00 systems at a customer site.
Whichtool allows you to apply the licenses to all the systems at the same time?
A. Initial Setup Tool
B. Device Manager - Storage Navigator
C. SVP Web Console
D. HCS License Key Management System
Which function is available in Hitachi Infrastructure Director (HID)?
A. Global Active Device setup
B. configuration of HDLM load balancing
C. basic provisioning of a VSP Gx00 system
D. automated provisioning for multiple VSP Gx00 systems
You want to create a Hitachi Dynamic Provisioning (HDP) pool on a VSP G600. Which two actions must you complete? (Choose two.)
A. Assign a spare drive.
B. Create RAID Groups.
C. Assign RAID Groups to the pool.
D. Create a virtual controller.
