Referring to the exhibit, what is the problem with switch port 0?
A. The transmit and receive links were switched.
B. The SFP+ is faulty.
C. The receive power is lower.
D. The link is not connected.
You connected your FAS8200 to a Brocade SAN switch. As shown in the exhibit, port 0e is not available. In this scenario, which statement is correct?
A. The incorrect SFP+ module is installed.
B. The switch zoning is using the FC nodename.
C. The incorrect firmware revision is installed.
D. The switch port is configured for mode E_Port.
What is a SAN best practice when initially configuring a Linux FC boot LUN?
A. Install the Host Utilities in the guest Linux OS.
B. Map the WWPN of the target.
C. Disable the HBA port with the host's BIOS.
D. Configure multipath to the LUN.
An administrator is configuring a SAN-only cluster. The data room that houses four AFF A220 controllers is small and not able to house the DS224C shelves. The administrator proposes to rack the shelves in a separate room that is 40 meters away from the controllers.
In this situation, how would you properly cable the controllers to the shelves?
A. Use multimode passive optical cables.
B. Use multimode active copper cables.
C. Use multimode active optical cables.
D. Use multimode passive copper cables.
When booting your NetApp storage system for the first time the system fails to boot.
What should you do first to address this problem?
A. You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.
B. You re-download the boot image to the compact flash card, then reboot the system.
C. You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.
D. You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.
What are two examples of supported NetApp FC configurations? (Choose two.)
A. a single NetApp node directly connected to a single host
B. a single switched environment with a NetApp node connected to only one host
C. a dual switched environment with a NetApp node connected to multiple hosts
D. a single NetApp node directly connected to multiple hosts
Which row of items should you look up in the IMT (Interoperability Matrix Tool) when designing a NetApp Storage Solution for a customer?
A. Host OS and patches, FC WWPN, Volume Manager, File System version
B. Host OS, iSCSI IQN, Volume Manager, Clustering
C. Host OS and patches, HBA driver, Volume Manager, File System, Clustering
D. Host OS, HBA driver, Host Memory and CPU Speed, File System, Clustering
You need to move a LUN non-disruptively from an AFF A200 HA pair to an AFF A700 HA pair within the same 4-node cluster using the steps shown below.
1.
Scan the host OS to discover all paths to the LUN.
2.
Execute the lun move command to move the LUN to the AFF A/00 HA pair.
3.
Remove the AFF A200 HA pair from the reporting-nodes list.
4.
Add the AFF A700 HA pair to the reporting-nodes list. What is the correct sequence in performing, these steps?
A. 1, 2, 3. 4
B. 4. 1, 2, 3
C. 4, 3. 2. 1
D. 3, 2, 1,4
You ate deploying an 8-node FAS8200 ONTAP cluster and attaching to an existing FC fabric.
Which two ONTAP features would be used to restrict or limit the available paths seen from the host? (Choose two.)
A. port sets
B. igroup
C. VIAN
D. Selective IUN Map
File deletions from a SAN-attached host that is using Windows Server 2016 are not freeing up space in LUN lun3. Referring to the exhibit, which setting is preventing the SCSI UNMAP operation?
A. Space reservation honored is set to false
B. Space reservation is set to disabled
C. Clone Autodelete Enabled is set to false
D. Space Allocation is set to disabled
