100% Pass Guarantee with HP HP2-N29 Dumps!

Correct Answer: D

Correct Answer: D

Before you begin, ensure that a console is connected to the TippingPoint IPS device via the console port,

and that the console is powered on and ready. When you turn on the IPS, you will see several status

messages before the OBE setup wizard initializes. When the OBE setup wizard runs, the following screen

appears:

Welcome to the TippingPoint Technologies Initial Setup wizard. Press any key to begin the Initial Setup

Wizard or use LCD panel. Press any key to begin the OBE setup wizard. The following message appears:

You will be presented with some questions along with default values in brackets[]. Please update any

empty fields or modify them to match your requirements. You may press the ENTER key to keep the

current default value. After each group of entries, you will have a chance to confirm your settings, so don't

worry if you make a mistake. Continue to the following section for instructions on account security.

Account Security Level

The Security Level dialog sets the security level that restricts user names and passwords. The default

security level is Level 2, but you have the option to select one of three available levels:

There are three security levels for specifying user names and passwords:

Level 0: User names and passwords are unrestricted. Level 1: Names must be at least 6 characters long;

passwords at least 8. Level 2: In addition to level 1 restrictions, passwords must contain:

-

at least 2 alpha characters

-

at least 1 numeric character

-

at least 1 non-alphanumeric character Please specify a security level to be used for initial super-user name and password creation. As superuser, you can modify the security level later on via Command Line Interface (CLI) or Local Security Manager (LSM). Security level [2]: Reference: http://www.nfwest.com/tp/docs/techd291-tos3-1_commandref.pdf

Correct Answer: B

Physical segments can be grouped together to form segment groups. You can apply a security profile

(policy) to a physical segment and segment groups.

Reference:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02586208/c02586208.pdf?ju

mpid=reg_R1002_USEN (page 12, physical segments, second paragraph)